Stream Engine® & X-Stream® Engine

New! Injection Molded housing with drip lip!

Looking to find out how to replace bearings or another issue? Check out our manual section at the bottom of the page.

Take me there

Employs A Brushless, Permanent Magnet Alternator
Adjustable To Match Turbine Output To Electrical Load
Capable Of Outputs Up To 1+ Kilowatt (kW)
Plastic and Stainless Steel Turbine Wheel Options

Universal Nozzles or Brass Nozzle Inserts
digital multimeter included to measure output current
Made of non-corrosive alloys for long life and durability
made in-house to ensure top level quality

PRICES STARTING AS LOW AS $995

Contact us to discuss your specific requirements and or check out the price lists below for the Stream Engine and X-Stream Engine. Due to the circumstances surrounding the Coronavirus all prices have been increased by 20% effective October 9, 2020.

View Pricing

Additional Features of the X-Stream® Engine

High Efficiency resulting in more power from the water source
Tuneable generator which maximizes output
More user friendly - easy to install and service

Outputs of 2+ kilowatts (kW) and 12, 24 & 48 volt options. Generating 240 volts.
Operating range from 3 metres (10 feet) to over 100 metres (300 feet)
Can operate with 1 - 4 nozzles

Resources

Pricing

STREAM ENGINE

Product	Price
1 Nozzle SE Plastic Turgo	$2850
2 Nozzle SE Plastic Turgo	$2940
4 Nozzle SE Plastic Turgo	$3120
Stainless Steel Low Flow Option	$400
Stainless Steel Turgo Option	$400
High Voltage Option	$400
High Current Option	$300

1K Stream Engine

Product	Price
1K Low or High Voltage (One nozzle, standard runner)	$1295
Additional Installed Nozzles (each)	$90
1k With Plastic Turgo Wheel Runner	$1545

X-STREAM ENGINE

Product	Price
1 Nozzle X-SE Plastic Turgo	$3150
2 Nozzle X-SE Plastic Turgo	$3240
4 Nozzle X-SE Plastic Turgo	$3420
Stainless Steel Low Flow Option	$400
Stainless Steel Turgo Option	$400
High Voltage Option	$400
High Current Option	$300

*Shipping Not Included. Pre-Payment Required On All Orders.

Manuals

Current Manuals

Archived Manuals

Parts

STREAM ENGINE PARTS

Product	Price
Turbine Housing (Unmachined) DIY special	$100
Turbine Housing (1 Nozzle) NEW	$200
Turbine Housing (2 Nozzle) INJECTION	$225
Turbine Housing (4 Nozzle) MOLDED	$275
Universal Nozzle	$15
Adaptor for Low Flow Nozzle Inserts NEW Black (1/2″ NPT)	$15
Adaptor for Low Flow Nozzle Inserts ABS (7/8-14)	$20
Nozzle Inserts (1/8,3/16,1/4,5/16,3/8,7/16,1/2) 1/2″ NPT	$15
Stainless Turgo Wheel (Stream Engine Wheel)	$750
Stainless Turgo Wheel (Stream Engine Wheel) with Hub	$800
Stainless Stream Engine Low Flow Wheel	$600
Stainless Stream Engine Low Flow Wheel with Hub	$650
Plastic Turgo Wheel	$350
Plastic Turgo Wheel with Hub	$400
Stainless Hub for Wheels (5/8-18)	$80
Bearing Kit, 3 x #6203 (Stream Engine & LH1000)	$35
Bearing Kit, Stainless Steel 2 x #6203 (Easy Tune)	$35
Rotor, Shaft and Hub Assembly	$450
Rectifier	$35
Junction Box	$300

*Shipping Not Included. Pre-Payment Required On All Orders. Due to the circumstances surrounding the Coronavirus all prices have been increased by 20% effective October 9, 2020.

Output

Stream Engine® & X-Stream® Engine

Employs A Brushless, Permanent Magnet Alternator

Adjustable To Match Turbine Output To Electrical Load

Capable Of Outputs Up To 1+ Kilowatt (kW)

Plastic and Stainless Steel Turbine Wheel Options

Universal Nozzles or Brass Nozzle Inserts

digital multimeter included to measure output current

Made of non-corrosive alloys for long life and durability

made in-house to ensure top level quality

PRICES STARTING AS LOW AS $995

Additional Features of the X-Stream® Engine

High Efficiency resulting in more power from the water source

Tuneable generator which maximizes output

More user friendly - easy to install and service

Outputs of 2+ kilowatts (kW) and 12, 24 & 48 volt options. Generating 240 volts.

Operating range from 3 metres (10 feet) to over 100 metres (300 feet)

Can operate with 1 - 4 nozzles